Mechanical Works

Client

Scope of Work

Year

JOHN COCKERILL

Manufacturing of anchorages for Termocandelaria CCPP (2 units) (Cartagena / COLOMBIA)

Ongoing

NOOTER/ERIKSEN, INC.

Manufacturing of casing, inlet duct, main frames, field seams & exhaust stack for 565-MW CCPP (Macae / BRAZIL)

Ongoing

INTECO MELTING AND CASTING TECHNOLOGIES GMBH

Manufacturing of ladle transfer cars, snorkel maintenance cars, snorkel exchange cars, hot offtakes & cars, switching devices and watercooled ducting for ISDEMIR 200T RH plant (Iskenderun / TURKEY)

Ongoing

TECHNIPFMC

Manufacturing of reformer steel structure for refinery expansion and modernization Project (Alexandria / EGYPT)

Ongoing

JOHN COCKERILL

Manufacturing of anchorages for Toplarna CCPP (2 units) (Ljubljana / SLOVENIA)

2020

JOHN COCKERILL

Manufacturing of pot lift platform steel structure for TATA Steel Plant (2 units) (Kalinganagar / INDIA)

2020

BALTEC IES

Manufacturing of GFT exhaust stack, structural steel, platforms and silencer baffles for Az-Zubaydiyah power plant (3 units) (Az-Zubaydiyah / IRAQ)

2019

NOOTER/ERIKSEN, INC.

Detail design and manufacturing of stack and secondary steel Arab Potash CCPP (Al-Safi / JORDAN)

2019

CAMFIL POWER SYSTEMS

Manufacturing of silencer splitters for gas turbine air intake systems (Port Sudan / SUDAN)

2019

COCKERILL MAINTENANCE & INGÉNIERIE

Manufacturing of Inlet Duct Grid for 495 MW CCGT-TPP Construction Project (2 units) (Nizhnekamsk / RUSSIA)

2019

COCKERILL MAINTENANCE & INGÉNIERIE

Manufacturing of Anchorages for 1.026GW Layyah CCPP HRSG Stack (2 units) (Layyah / PAKISTAN)

2019

CAMFIL POWER SYSTEMS

Manufacturing of Air Intake System / Self Cleaning Filters (2 units) Mornaguia, TUNISIA

2018

WesTech

Manufacturing of 24m Dia x 14m Side Wall Deep BedTM Paste Thickener mechanism (2 units) Gayskiy Gok / RUSSIA

2018

NOOTER/ERIKSEN, INC

Detail design and manufacturing penthouse enclosure and embedments for 900 MW CCCP (2 units) Turakurgan UZBEKISTAN

2017-2018

NOOTER/ERIKSEN, INC

Detail design and manufacturing of exhaust stack, penthouse enclosure and embedments for 450 MW CCCP Navoi UZBEKISTAN

2017-2018

COCKERILL MAINTENANCE & INGÉNIERIE

Manufacturing of exhaust stacks for 1574 MW CCPP (4 units) (Mary / TURKMENISTAN)

2016 - 2017

CAMFIL POWER SYSTEMS

Manufacturing of Air Intake System and Air Suction Duct for S-OIL Onsanax Residue Upgrading Complex Project (Onsan / SOUTH KOREA)

2016 - 2017

CAMFIL POWER SYSTEMS

Manufacturing of Air Intake System for 450 MW Open Cycle Gas Turbine Power Station (3 units) (Azura Edo / NIGERIA)

2016 - 2017

HOWDEN AXIAL FANS

Manufacturing of axial fan static parts for 3 x 650 MW South Helwan Supercritical Thermal Power Plant (6 units) (Giza / EGYPT)

2016 - 2017

CAMFIL POWER SYSTEMS

Manufacturing of filtermodules, support structure, platforms, ladders and installation of electrical outline for extension of the existing Air Intake System (Finspång / SWEDEN)

2016

HOWDEN AXIAL FANS

Manufacturing of structural steel components for industrial fan testing facility (Växjö / SWEDEN)

2016

NOOTER ERIKSEN

Manufacturing of casing, inlet duct, main frames, field seams, exhaust stacks, stair tower, ladders, platforms, drum supports, pipe supports and embedments for 1280 MW CCCP (4 units) (Djelfa / ALGERIA)

2014 - 2016

COCKERILL MAINTENANCE & INGÉNIERIE

Manufacturing of casing, inlet duct, outlet duct and exhaust stack for 400 MW CCCP (Kazan / RUSSIA)

2015

NOOTER ERIKSEN

Manufacturing of catalyst support frames for 2300 MW Nishi Nagoya CCCP (6 units) (Nagoya City / JAPAN)

2015

NOOTER ERIKSEN

Manufacturing of pipe supports for 1250 MW Port Everglades Next Generation Clean Energy Center (PEEC) natural gas fired combined cycle power plant (3 units) (Broward County, Florida / U.S.A.)

2014

GENERAL SYSTEMS DESIGN

Manufacturing of coil bundles for 230 MW Gardabani CCCP (2 units) (Gardabani / GEORGIA)

2014

NOOTER ERIKSEN

Detail design and manufacturing of ladders, plaforms, drum supports, silencer supports along with manufacturing of roof casing, field seams and pipe supports for 1240 MW VPI Immingham CHPP (Immingham / UNITED KINGDOM)

2014

ENKA

Manufacturing and detail detail design of various storage tanks (diesel, fire water, air receiver, nitrogen equalization, etc.) along with manufacturing of exhaust stacks, pipe spools, pipe racks, air compressor/substation/fire water pump/waste storage shelter/diesel unloading shelter/workshop buildings and platforms for 3x42 MW Power Generation Plant of West Qurna Oil Field, Phase II

2012-2014

NOOTER ERIKSEN

Detail design and manufacturing of exhaust stack, stair tower, drum supports, pipe & electrical supports and embedments for 250 MW Dead Sea Works CCCP (Sodom / ISRAEL)

2013

NOOTER ERIKSEN

Manufacturing of LB & SB pipe supports and cable tray supports for 2 x 800 MW CCCP (4 units) (U-Thai / THAILAND)

2013

NOOTER ERIKSEN

Manufacturing of LB & SB powerstrut and pipe supports (2 units) (Seoul / SOUTH KOREA)

2013

NOOTER ERIKSEN

Manufacturing of LB & SB pipe supports and cable tray supports for 2 x 800 MW 1,600MW gas turbine combined-cycle (GTCC) power generation plant (4 units) (Nong Saeng / THAILAND)

2012

NOOTER ERIKSEN

Manufacturing of structural steel for inlet duct, stair tower, ladders, platforms, drum supports, pipe supports and accessories for 460 MW CCCP (Wexford / IRELAND)

2012

BERSEY

Manufacturing of gas ducts and mechanical components for industrial boilers (Kocaeli / TURKEY)

2012

NOOTER ERIKSEN

Detail design and manufacturing of exhaust stacks for Shuweihat CCCP (4 units) (Abu Dhabi / UAE)

2012

NOOTER ERIKSEN

Design and manufacturing of exhaust stack, drum supports and embedments (Baku / AZERBAIJAN)

2012

GENERAL SYSTEMS DESIGN

Manufacturing of stacks, stair towers and platforms for 120 MW BİS Energy CCPP (2 units) (Bursa / TURKEY)

2012

 BERSEY

Manufacturing of structural steel, cyclones, process equipment for wood processing plant (Adana / TURKEY)

2011

NOOTER ERIKSEN

Detail design and manufacturing of exhaust stacks, stair tower, ladders, platforms, drum and silencer supports and LB & SB pipe supports (Navoi / UZBEKISTAN)

2011

NOOTER ERIKSEN

Manufacturing of stair tower, ladders, platforms, drum and silencer supports for 1000 MW CCCP (Antalya / TURKEY)

2010

TEKFEN

Manufacturing of structural frames and pipe racks for LDPE-3 polyethylene factory (Doha / QATAR)

2010

NOOTER EIKSEN

Design and manufacturing of exhaust stacks, stair towers, ladders, platforms, drum and silencer supports for 2 x 1000 MW EnerjiSA CCCP (Bandırma / TURKEY)

2009

GENERAL SYSTEMS DESIGN

Complete mechanical installation of 125 MW CCCP extension (Mersin / TURKEY)

2009

NOOTER/ERIKSEN

Design and manufacturing of casing, exhaust stack, stair tower, ladders, platforms, drum and silencer supports for 125 MW CCCP extension (Mersin / TURKEY)

2009

CAMİŞ ELEKTRİK

Manufacturing and installation of bypass stack for 125 MW CCCP extension (Mersin / TURKEY)

2009

WORLD CONTROL

Manufacturing of casing for NUH Energy CCCP (Gebze / TURKEY)

2009

NOOTER ERIKSEN

Design and manufacturing of exhaust stack (Tasmania / AUSTRALIA)

2008

NOOTER ERIKSEN

Manufacturing of embedded structural components for Sugres Power Cogeneration Plant (St. Petersburg / RUSSIA)

2008

GAMA POWER SYSTEMS

Manufacturing of Air and Flue Gas Ducts of Steam Boilers, Iskenderun Steel and Iron Works.

2007

TEKFEN

Manufacturing of steel structures for Sangachal ACG Second Produced Water Project (Desalination Plant), Azerbeijan.

2007

CIMSA CEMENT

Manufacturing and erection of steel structure for 70,000 m3 capacity clinker storage hall, Kayseri Cement Factory.

2006

GAMA INDUSTRY

Manufacturing of steel for a 50,000 m3 capacity oil storage tank in Iraq.

2006

NOOTER/ERIKSEN

Design, manufacturing and delivery of exhaust stacks Viridian Power Huntstown II Cogeneration Project, Dublin, Ireland

2006

NOOTER/ERIKSEN

Design, manufacturing and installation of exhaust stack, Camiş Cogeneration Project, Mersin

2006

NOOTER/ERIKSEN

Design, manufacturing and delivery of drum supports, stairs, platforms, and gratings for Camiş Cogeneration Project, Mersin

2006

CAMİŞ ELEKTRİK

Design, manufacturing and installation of Bypass Stack, 125 MW Cogeneration Plant, Mersin.

2006

HIDIROĞLU FOODS

Design, manufacturing and erection of truck unloading chutes steel structure

2006

ÇİMSA

Main Entrance Steel Canopy

2005

SODA SANAYİİ

Manufacturing and erection of the Lime Furnace steel structure, Mersin.

2005

ATAŞ REFINERY

Oil Storage Tank, Mersin. Manufacturing and installation of 800 tons of steel for 30,000 m3 capacity fuel oil storage tank including steam tracing and other process piping.

2001-2002

TEAŞ

Replacement of boiler tubes for Afşin - Elbistan "A" Power Plant. Revision works and replacement of membrane walls in Boiler Unit II of 4x360 MW coal fired power plant Kahramanmaraş.

2000

ATAŞ REFINERY

Oil Tank Maintenance : Rehabilitation and maintenance of crude oil tanks, shotblasting, epoxy painting, weld repairs, replacement of base plates, replacement of gaskets of floating roofs and various civil works, Mersin.

1999-2000

DELKOR LTD.

Stainless and Carbon Steel Products, Bristol, England. Various press filters and vessels (some pressurized) were manufactured and installed in Şişe Cam chemical plants.

1997-1988